Know How To Deal With a Fire Before One Starts
Follow These Four Steps When That Need Arises
You've probably seen a fire extinguisher hanging in offices and schools in Bent Tree, TX, before, but did you ever have to use one? If you needed to put out a fire, would you know how to use one? Following these four steps will help you if and when that need arises.
1. Pull the Alarm
When a fire erupts, sound the alarm so everyone in the building can get out. Once the alarm is on, you need to notify the authorities. Home alarm systems can automatically call all necessary emergency personnel. If you do not have home monitoring, call 911 and speak with the fire department and describe the situation.
2. Assess the Fire
To give the authorities all of the information they need to respond appropriately, assess the size of the flames. A small kitchen fire can be managed more easily than a blazing two-story building. If there is no way you can put out the fire, evacuate the area immediately. If it is small enough that you can attempt to put it out, remain calm and get your extinguisher.
3. Use the P.A.S.S Technique
Make sure to use the PASS technique when operating a fire extinguisher. Pull the pin. Aim the hose at the fire. Squeeze and Sweep: squeeze the handle down while sweeping the hose back and forth.
4. Reassess the Fire and the Extinguisher
If the flames aren't out or the extinguisher is empty, leave the area. If the visible flames have been extinguished, back away from the fire damage. If your extinguisher isn't empty, you can remain in the area to ensure the flames don't start again.
Knowing how to use a fire extinguisher is key to remaining calm during a fire emergency. Any safe attempt to contain the flames can help firefighters in Bent Tree, TX, minimize the damage once they get to the scene. Remember, after the fire has been put out, you'll want to call a fire restoration company to rid your home of smoke and debris.